DC12V DC24V 20.5W DIN43650 Hydraulic Magnetic Induction Coil
Ordering Code: 094001000 094002000
1. 094001000 094002000
2. Material: Thermosetting
3. DC24V 20.5W
5. We use high quality material , the collection equipment
efficiency can be improved , the energy loss also can be reduced.
6. Its lifespan is about 1 million cycles.
For your safety do not pressurise system until all valves and pipes
are fully secured. Do not attempt to remove a fitted valve while
system is under pressure.
1. Prepare supply and blowtube pipes* to suit valve type and
specification. Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes (or flanges, tighten bolts to 10Nm)
and blowtube to valves, ensuring no excess thread sealant can enter
the valve itself. Ensure blowtube is fully inserted into the valve
5. Tanks and pipes must be independently restrained from FS and DD
6. Connect RCAC pilot port to remote pilot valve, or install
MIP/3DS screw in pilot valve.
7. Apply moderate pressure to system and check for installation
8. Fully pressurise system.
9. Test fire and listen for proper actuation and crisp pulse noise.
Valve is not a structural component. Do not rely on valve to retain
tanks or pipe. Refer to Camlock product specifications for
Quality Standards :
The company for the products are brand new original products, no
second-hand and refurbished products, or leave a compensable ten
and return the full amount , but the buyer due to our purchase of
model error is not responsible for returns, another of the
company's sales of products enjoy one year from the date of
shipment quality assurance , according to the original quality
standards , during warranty with product problems , need
confirmation testing by the manufacturer , the supplier to be
solved , the demand side due to storage , use, poor maintenance
caused by lower-quality product , and not raise objections
All item Comes with Basic 3 Month Sellers Warranty, if item
defective in 3 Month, We will offer replacement without extra
Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We
will contact suppliers or Manufactory for Warranty. Buyers Might
Need to pay the Shipping fee For resend the replaced item.
|Our product features:||Our Services Guarantee:|
|1) Competitive price||1) Prompt respond (Reply with 24 hours)|
|2) Good quality||2) Free Samples (Customer pay for the delivery cost)|
|3) Professional Packaging,||3) Registration support.|
|4) Produce according to Customers’ instruction||4) Photos/videos are available during production.|
|5) None delay shipment|
5) Loading inspection, and send loading photos before shipment.